Blue Collar Calculators

Retaining Wall Calculator

Figure out how many retaining wall blocks and cap blocks you need, with a little extra for cuts and breakage.

How this works. We add 5 percent extra blocks for cutting and breakage. A standard block face is 12 inches wide and 4 inches high. A large block face is 16 inches wide and 8 inches high. Always check your local code before building a wall over 3 feet high.

Common questions

How tall can I build a retaining wall without an engineer?

In most places, walls up to 4 feet high do not need a permit or engineering, measured from the bottom of the footing, not from the ground. A driveway, slope, or building above the wall removes that exemption at any height. Check with your local building department, since some cities lower the limit to 3 feet.

Do I need gravel behind a retaining wall?

Yes. Gravel and a drain pipe behind the wall let water out so pressure does not build up and push the wall over.

How many cap blocks do I need?

One cap block per block in the top row. The calculator shows the number of caps with the blocks.