Blue Collar Calculators

Two by Four Studs Calculator

Figure out how many 2×4 studs you need for a whole framing job, by total wall length, with extra for doors and windows and waste.

16 inches on center is standard for load bearing walls. 24 inches is common for interior non-load bearing walls.

10% covers cuts, bowed boards, and corners.

Leave it blank if you just want the amount. Add a price to see the cost.

How this works. Each door opening adds 4 studs, 2 king studs and 2 jack studs. Each window adds 6, the same 4 plus 2 cripples. The waste allowance covers cuts, bowed boards, and corners. Buy pre-cut studs for the wall height: 92-5/8 inches for an 8 foot wall, 104-5/8 for a 9 foot wall, and 116-5/8 for a 10 foot wall.

Common questions

How many studs do I need for a wall?

Divide the wall length in inches by the stud spacing, round up to a whole stud, and add 1, for the stud at each end. Then add extra for doors, windows, and waste.

How many extra studs does a door or window opening need?

A door adds 4 studs, 2 king studs and 2 jack studs. A window adds 6, the same 4 plus 2 cripples.

How long are pre-cut studs?

Pre-cut studs are 92-5/8 inches long for an 8 foot wall, 104-5/8 inches for a 9 foot wall, and 116-5/8 inches for a 10 foot wall. With one bottom plate and a double top plate, the framed wall stands 1-1/8 inches taller than the finished ceiling height, which leaves room for ceiling drywall.